 |
Adhered to masts
of Ships, walls, bridges etc to reduce false images,
reflections and echoes to nearby antennas |
|
Suppressing parabolic antenna
side lobes. |
|
Suitable for Out-Door Applications |
|
Attaching to vehicles to reduce
overall Radar Signature |
|
Suppressing specular reflections
inside microwave units e.g. Power Amplifiers of
mobile telephones, Low Noise Blocks of Satellite
receivers etc. |
| |
|
|
| |
| |
| |
 |
| |
-15 dB at ±
5% band with around the center frequency (as compared
to the flat metal plate of the same size) |
|
 |
| |
|
Preventing of False Image from Ship’s Mast |
 |
|
The Photograph shows the installation of KV-RA material
on the mast of a naval ship. This prevents false images
from occurring by greatly reducing the amount of reflection
taking place. |
| |
|
Prevention of Side and Back Lobe Radiation from a Parabolic
Antenna |
 |
The photograph shows KV-RA/CFA material installed on the
skirt/shroud of a parabolic antenna. This improves side and
back lobe performance, thus raising overall antenna performance.
|
|
Prevention of Unnecessary Radiation |
 |
|
The photograph shows the installation of KV-RA material
to prevent unnecessary radiation of the airplane guiding
radar. It controls the reflection wave interference generated
by the reserve radar and steel tower, thus increasing the
reliability of the radar |
| |
 |
| |
Custom tailored specially designed multilayered rubber absorbers |
| |
 |
| |
Megnetically loaded thin ( 1.0mm thick) rubbersheets
to cut down surface currents phase noise local oscillations etc in microwave devices. |
| |
|
