Laser Cutting System, Manufacturers Of Laser Cutting System, Exporter Laser Cutting System, Manufacturer And Exporter Of Laser Cutting System
HOME | SITE MAP | FEED BACK
THE COMPANY ACHIEVEMENT PRODUCTS EVENTS CLIENTS DEALERS PRESS RELEASE NEWS DOWNLOAD CONTACT US
 
Laser Cutting System  
 
 
 
BALL RAIL SYSTEM
Smooth & friction guided motion, high precision & high speed ball, long life & better load carrying capacity.
BALL SCREW MECHANISM
Precision movement imparted through ball screw mechanism. Supreme quality of ball screw to provide high accuracy and repeatability at high speed with low noise runner block.
USER FRIENDLY SOFTWARE
User-friendly software for laser power and pulse frequency, pulse duration along with position control.
NESTING
Nesting software to nest different types of jobs in single sheet and optimal use of raw material. Accommodation of different types of jobs from scrap material & common edge cutting. Complete material management through user-friendly software.

HEIGHT SENSING UNIT
Adjusting preset height automatically. It helps to cut little sloppy (non-flat or non-linear) surface of sheet. Non-contact & contact types of versions are available.
STRUCTURAL DESIGN
Structural design is such that it can withstand heavy loads. Vibration pads are used for sustaining the structural damping.
 
REMOTE CONTROL
Flexible machine controls from remote place with emergency stop facility, easy to understand or self-explanatory audio & video display machine.
 
SHEET LOADING & CLAMPING
Pneumatically actuated loader with ball on the top of it for easy sliding of the sheet. Pneumatically controlled firm clamping on the sheet. It can adjust the position of the clamp on the table. Safe loading and clamping for operator who is loading and un-loading the sheet.
 
DETACHABLE OPTICS
Replacements of mirror without any change in linked alignments.
 
THERMAL OPTICS STABILITY
Parallel water-cooling system with temperature control. It eliminates the thermal expansion of optics and increases peak power life.
 
OPTICS BELLOWS
Metallic bellows for protection of optics form contamination.
 
CONTROL & DISPLAY
SIEMENS or PC based SLT Ltd. controls available.
 
  Bs 3015 RP 4020 LD 3015
Drive Feed Method Ball Screw Rack&Pinion with Rall Guides Linear Drive
Working Area/Sheet size 3000mm x 1500mm 4000mm x 2000 mm 3000mm * 1500 mm
Z Axis Travel (max) 200/150mm 200/150mm 200/150mm
workpiece
Weight (Max.)		 450kgs 1500kgs 450kgs
Control Method X-,Y-, and Z- axis controlled X-,Y-, and Z- axis controlled X-,Y-, and Z- axis controlled
  (Three axis simultaneously controlled) (Three axis simultaneously controlled) (Three axis simultaneously controlled)
Travel Method X-Y : Optical travel X-Y : Optical travel Stationary table ,X,Y and Z- axis Movement for Cutting head
Positioning Speed(Max)      
X-axis 40m/min 40m/min 150 m/min
Y-axis 40m/min 40m/min 150 m/min
Z-axis 15m/min 15m/min 15m/min
Positioning Accuracy +/- 0.1mm +/- 0.1mm +/- 0.1mm
Feed Rate 10m/min 10m/min -----
  10m/min 10m/min -----
Least Command Increment 0.001mm 0.001mm -----
Repeatability 0.03mm 0.03mm 0.03mm
Acceleration --- --- 2G for X&Y
CNC Controller siemens sinumeric810D siemens sinumeric840D siemens sinumeric840D
CNC Control Method Fully closed loop method Fully closed loop method Fully closed loop method
Control Function X-,Y- and Z- axis Controlled X-,Y- and Z- axis Controlled X-,Y- and Z- axis Controlled
  (simultaneously controlled) (simultaneously controlled) Laser Power Control
  Laser oscillator control Laser oscillator control  
Assist Gas Selector Automatic selection Automatic selection Automatic selection
Electrical Requirement AC, 3-Phases, 415 V, Complete system AC, 3-Phases, 415 V, Complete system 400v, 3 phase ,60Hz
Total Weight 6500kgs 14500 kgs 11000 kgs
Input Methods Manual data input with numeric keys Manual data input with numeric keys manual (MDI),Edit, RS-232 DNC, or 3 1/2* PC Compatible disk
  3.5" FD (built - in - type) 3.5" FD (built - in - type) CD/DVD disk,USB,Ethernet PCMCIA
Operating Modes Edit/Memory / MDI / Auto / Manual / teach Edit/Memory / MDI / Auto / Manual / teach Automatic and Manual
Display 10.4 " COLOUR TFT DISPLAY 10.4 " COLOUR TFT DISPLAY 10.4 " COLOUR TFT DISPLAY
I/O Interface PROFIBUS PROFIBUS -----
DIaplayfunctions Program directory Program directory Program Contents
  Subroutine directory Subroutine directory Position Information
  Position & Feed information Position & Feed information Program Check
  User cycle directory User cycle directory Setting
  Alarm messages Alarm messages Parameters
  Tool diameter compensation Tool diameter compensation Beam Diameter
  (Offset) (Offset) Compensation
  Program Simulation Program Simulation Assist Gas Status
  Diagnosis (CNC self diagnostics) Diagnosis (CNC self diagnostics) Self Diagnostics
Optional Setting Setting Maintenance Reminders
Working Area      
X- stroke 1250/2500/300mm 1250/2500/300mm 1250/2500/300mm
Y- stroke 1250/1200/1500mm 1250/1200/1500mm 1250/1200/1500mm
* All above mentioned data & details are indicative only. It is subject to variation for any future development, technology upgradation and feasibility. Company reserves right to make changes accordingly.
Working Area Optional
X Stroke 1250 mm 2500 mm 3000 mm 4000 mm
Y Stroke 1250 mm 1250 mm 1500 mm 2000 mm
Z Stroke 100 mm 100 mm 150 mm 150 mm
 
 
  BRAHMASTRA
Laser Cutting System
   
 
Design Features
Technical Specification
      
   
  Engineering Solution
 
  Laser Cutting System
  Laser Marking System
  Laser Welding System
  Laser Micro-Machining System
  CNC Solution
  Gems & Jewellery
  Engineering Solution
Solar Cell Mfg Machine
RF & Microwave Solutions
   
 
 
 
 
 
   Copy rights @ 2011 Sahajanand Laser Technology Limited.
Maintain by Pioneer Internet Marketing.